2021.09.26 09:42 Milton26 Filament isn't being fed into printer even though the motor is moving. Works fine if I manually feed it.
I got a ender 3 pro around a month ago and was able to get a few prints off before I stopped using it. Recently when I went to print something out, I noticed that it was having extruding problems. I tried cleaning the nozzle but ended up just replacing it. After replacing the nozzle, I ran into this problem. No filament is being fed into the printer even though the motor that feeds the filament seems to work fine. It's only when I manually push the filament into the printer that it prints like intended. I have taken apart the filament feeder and saw nothing wrong. What adds on more to the confusion is the fact that it retracts the filament just fine when the nozzle is lifted
Video example: https://imgur.com/a/aDSFUEH
I have looked for threads with a similar problem but have not found anything. Should I replace the motor or is this a software problem? I have used both Cura and Creality's slicer but both have had the same result. Thank you in advance!
submitted by Milton26 to 3Dprinting [link] [comments]
2021.09.26 09:42 TheresNoPeopleHelp There's no people anymore
Hey, this may be a bit scatterbrained but I am not an actual writer and the last thing I actually wrote that I gave a shit on was a high school paper to pass my senior year. In any case I want to know if anyone else is actually out there, so I figured reddit would be a good place to go, I checked facebook but with the few friends who barely use it, there was no updates, things seem to be continuing in other places because on twitter there are still tweets being sent out, nothing about no one being around though.
I woke up a few hours ago with my family being gone, I sleep in the garage so I dont know if thats why I am still here or not, in any case its not that they are somewhere else, that was my first thought aswell, but I wanted a drink and drove to the gas station down the street, but no one was there, the door was open, cars were there, but no one was inside, I called out but got no response. I thought that maybe they left for lunch or something in the back, so I went to the bigger store a bit further down and no one was there either. I dont know what to do, I have food and water, power is still on, the animals are still here too. when I looked outside I thought I saw something in the woods behind a house across the street but I could be psyching myself out, there are deer and bears out here. Any advice would be greatly appreciated, I think that people still exist just not around me anymore, the dogs seem to be worried but that could be because my family is gone aswell. The news has been less than helpful, random events keep playing but I am not sure how or why, I can't get into contact with anyone I know from this area, or from other areas. I actually just got a message, its pretty mundane but ill transcribe it for you guys:
friend: Hey there!
Me: Oh hey, random question, have you seen anyone around at all?
f: No I haven't. I've been preoccupied with work
m: On, yeah there's no one here. Like, at all.
m: Like my family is gone, at first I thought they went somewhere, shopping maybe I did wake up late but there's no one at the gas station, and I didn't see any cars around
f: I wouldn't worry about it too much. You should sit down and think a minute. Do you want some water?
m: I don't know, I think I'll get a drink yeah.
I feel much better now that i've had contact with someone. If you guys have any questions or some advice please send them my way, I don't know if anyone else is dealing with this, but I feel like any suggestions could hold the key to finding out what the hell is happening.
submitted by TheresNoPeopleHelp to nosleep [link] [comments]
2021.09.26 09:42 prawnbiryani 💗☁🍦🌸🧁🤍🦩
|submitted by prawnbiryani to 11hr11min [link] [comments]|
2021.09.26 09:42 Sweet_Ad7233 MadFloki 🐶~ Potential Gem with High Upside 💎 | Rewards in BNB | Launching Now !
🐶MadFloki is the angriest Floki reward paying meme token currently around! The marketing team has done an awesome job so far with their designs and marketing efforts and more is on the way!
MadFloki is the next evolution of a Meme token which reward holders by paying BNB token on the Binance Smart Chain (BSC) address.
Its the best high reward paying token using the power of maximize your earnings for now & future.
Simply hold $mFloki tokens and get rewarded 7% of the transaction in BNB straight to your wallet
FLOKI Names are trending everywhere and doing wonders!
🔥It automatically delivers you BNB to your wallet every 20 minutes 🔥
Fill up your wallet before Elon Musk's next tweet!
👼🏻 Total Supply: 1 Billion
7% $CAKE Reflections
2% Into Liquidity Pool
1% Into Marketing.
💰 Slippage range - 12℅.
As it is Fair launch make sure you use maximum slippage at start, in order to ape in and not get rejected!
Links related to MadFloki
Buy Here: https://pancakeswap.finance/swap?outputCurrency=0x810d34c7ddeca45d8c51e13bc2b80f9ecb30afa6
LP Locked: https://deeplock.io/lock/0x915d6B0a3C184324ce2e512D08F9F2227d83d0B8
Renounced Ownership: https://bscscan.com/token/0x810d34c7ddeca45d8c51e13bc2b80f9ecb30afa6#readContract
submitted by Sweet_Ad7233 to CryptoMars [link] [comments]
2021.09.26 09:42 bloodblackshadow im looking for a light novel that i forgot
the mc start of in the army but runs away to a library and learn all kind of martial art and a spell that used the blood of demons to send him self back in time to his younger self as a child with knowledge of the future
submitted by bloodblackshadow to ProgressionFantasy [link] [comments]
2021.09.26 09:42 Dtrinnie 🐶 MusKy Doge 👑 | Low Marketcap | Liquidity Lock | Owner Renounced
🐶 MusKy Doge 👑 | Low Marketcap | Liquidity Lock | Owner Renounced
2021.09.26 09:42 Woople74 Would you like running apps to be more competitive ?
For example while you are running you would hear "Your friend X is 10m/1min in front of you". I think it could be a great idea to have more direct interaction with your friends performance while you run to motivate yourself.
submitted by Woople74 to running [link] [comments]
2021.09.26 09:42 mushrumchild Frog in a strawberry hat
2021.09.26 09:42 undefeatedff Who to start QB
2021.09.26 09:42 rabengeieradlerstein What indicates clearly that a person is middle class?
2021.09.26 09:42 Professional-Dare-82 Bitsale (BSL) just launched!
Bitsale (BSL) is live! 10b total supply. Liquidity locked. 65% of the tokens burned. Deflationary token 3% goes back to the holders. 3% goes to add liquidity to the pool in every trade.
you can buy on Pancakswap when you done your own research of cours. Contract address: 0xd217c6959bbcea7be7e1106d5f76e51ffaffb9c0
submitted by Professional-Dare-82 to CryptocurrencyICO [link] [comments]
2021.09.26 09:42 metaesthetique Me wondering if anyone knows of an active but chill guild on S1
|submitted by metaesthetique to Shining_Nikki [link] [comments]|
2021.09.26 09:42 TX908 Prefab Homes by Patterson
|submitted by TX908 to prefab [link] [comments]|
2021.09.26 09:42 WorldsBestGranddad22 Am i
2021.09.26 09:42 killHACKS Holup
|submitted by killHACKS to HolUp [link] [comments]|
2021.09.26 09:42 djhazydave Bambino plus shot volume question
When using the single shot pressurised basket and the pre-programmes settings I’m getting a 30ml shot but when I’m using the double shot pressurised basket I’m only getting about 37-40ml instead of 60ml. Same beans, same grind size (got them ground at the coffee shop yesterday, waiting for payday to buy a grinder). Does anyone have any idea why it would be doing that?
submitted by djhazydave to espresso [link] [comments]
2021.09.26 09:42 Ladder_Remarkable Est-ce qu'il y a des quartiers à éviter en déménageant à Lyon?
2021.09.26 09:42 durhauz Billie Marten - More Than This (Amazon Original)
|submitted by durhauz to IndieFolk [link] [comments]|
2021.09.26 09:42 txrx_reboot Free 30-day trial VM firewalls available
Happy lab time everyone.
It seems that anyone can now get free 30-day trial VM Palo Alto Networks firewalls for ESXi and Linux KVM.
Take the industry’s leading virtual firewall by market share for a no-obligation spin in your virtualized environments. We made it easier to try out VM-Series firewalls in VMware ESXi and Linux KVM environments through our 30-day free trial for VM-Series firewalls. This enables you to validate VM-Series firewalls in your own custom environment and to try our latest security innovations that are built on top of this platform at no cost to you for a period of 30 days. This offer is in addition to the free trial that we offer to our cloud customers through Marketplace listings.
submitted by txrx_reboot to paloaltonetworks [link] [comments]
2021.09.26 09:42 FrontpageWatch2020 [#344|+824|40] This is me every night. [r/CODWarzone]
2021.09.26 09:42 NecroSyri Homemade worm light (using LEDs, battery and resistors)
Hi, I'm trying to make a simple LED lamp using scrap components.
I've these leds : https://www.amazon.fgp/product/B08BWPLJMH/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
And I'm planning to use the white ones, so according to the description it's : White: 3.0-3.2V
I've also resistors :
3.9K Ohms 1/4 Watts +/- 5%
5.6K Ohms 1 Watts +/- 5%
And a battery from an old RC car (looks like an AA battery wrapped in plastic with wires to recharge on usb), it says LJ Li-ion 14500/400mAh 3.7V I
I've tried a few things like directly using the LED on the battery, it works, it's bright, but I burned a LED, it doesn't works anymore (due to too high voltage, 3.0-3.2 vs 3.7 if I understand properly).
I tried using multiple LEDs in parallel, it works fine (IDK if it's burning the LEDs or not) I tried with 3 so far and it works fine.
I tried the same but in series, and it doesn't works, no matter which side I put the LEDs.
Using those LEDs, the battery, and maybe a few resistors, would it be possible to male something that could work, without burning the LEDs, and allowing me to put a maximum of LEDs on it ? (I think 3-4 would be enough, I'm trying to make a homemade worm light to play with my wonderswan)
I don't have much knowledge in electronics, except that LEDs are supposed to be put in a certain way, like the long leg goes in the + and the short in the -, that's why I'm asking for help, thanks.
submitted by NecroSyri to AskElectronics [link] [comments]
2021.09.26 09:42 demonicLeir1222 Question about shipping
2021.09.26 09:42 sername_is-taken What it looks like to accidentally set layer height to 4.0 instead of 0.4
|submitted by sername_is-taken to 3Dprinting [link] [comments]|
2021.09.26 09:42 ChickenBoi6108 Are they removing shinobi's charged heavy?
In testing grounds I can't do the charged heavy to whip or pull enemies towards me. I also do an unblockable cartwheel type thing if I run and guard break
submitted by ChickenBoi6108 to forhonor [link] [comments]
2021.09.26 09:42 FrontpageWatch2020 [#477|+1837|85] No break for two weeks chapter 1027 will be released 1 October and chapter 1028 will be released 8 October [r/OnePiece]